Decorative picture of a cow.
Decorative picture of a field with straw bails on.

FarmIT 3000 EID Weigh Crate - New 1st May 2011

FarmIT 3000 | News and Events | Cattle | Sheep | Arable | EID | Weighing and Drafting | Accounts | Organics | Modules | Support
Decorative picture of some sheep and a farmer.
Decorative picture of a feild.

The all new FarmIT3000 Sheep Weigh Crate, brings together our experiance of fitting EID readers to other sheep weigh crates. Specifically designed to operate with a Electronic Tag Reader, the weigh crate is tuned to allow the use of the smaller Agrident EID reader the ASR400, to reduce cost.!

The weigh crate is manufactured from Aluminium to not only reduce the weight, but also to reduce interference with the EID equipment. It features sliding doors, operated from handles next to the weigh head, and has a removeable equipment rack to allow the removal of the electronics.

The Displayed Configuration - Left

FarmIT3000 Weigh Crate
Agrident ASR400 EID Reader Module
TruTest MP600 Loadbars
TruTest XR3000 Weigh Head

Please call 01938 820625 for the latest prices and availability


FarmIT 3000 EID Weigh Crate

The door slide open on heavy duty roller bearings, which slide out of the back of the weigh crate controlled by handles. It also has a robust isolation frame.

The EID antenna are built into the sides of the weigh crate, thus protected from damage by horns etc.

The floor is aluminum chequer plate.

All cabling is also kept out of harms way to elminate sheep nibble and accidental damage.

Normally we run the EID reader of a 12Volt, fencing or leisure battery.

     


Copyright 2004 Border Software. All rights reserved. Request Free Demo CD.